9" 90° Saddle Tap for Round Duct — 26-Gauge Galvanized Steel

This 9-inch 90-degree saddle tap creates a perpendicular round branch connection from compatible round HVAC trunk ductwork. The curved saddle base follows the contour of the main duct, while the straight outlet provides a direct takeoff for connecting round branch ductwork.

Constructed from 26-gauge galvanized steel, the fitting provides a durable connection for residential and commercial supply-air, return-air, and ventilation systems. The saddle base can be mechanically fastened and sealed to help reduce air leakage.

Sizing Note: The 9-inch measurement identifies the nominal branch outlet diameter. Confirm that the saddle curvature matches the round trunk duct diameter before ordering.

• 26-gauge galvanized steel construction
• 9-inch nominal round branch outlet
• 90-degree outlet creates a perpendicular duct takeoff
• Curved saddle base follows compatible round trunk duct
• Creates a branch connection from round HVAC ductwork
• Suitable for supply-air, return-air, and ventilation systems
• Can be mechanically fastened and sealed as required
• Suitable for residential and commercial HVAC installations

• Product Type: 90-Degree Saddle Tap for Round Duct
• Nominal Branch Diameter: 9"
• Outlet Angle: 90 Degrees
• Material: Galvanized Steel
• Material Gauge: 26 Gauge
• Branch Shape: Round
• Mounting Surface: Compatible Round Duct
• Mounting Type: Curved Saddle Base
• Application: HVAC Branch Duct Connection
• Product Code: STR90-0909

Application: Designed to create a 9-inch perpendicular branch connection from compatible round HVAC trunk ductwork.

Installation: Confirm that the saddle curvature matches the trunk duct diameter. Mark and cut the required opening, position the saddle over the opening, mechanically fasten it, and seal around the perimeter.

Connection: Attach compatible 9-inch round branch ductwork to the straight outlet. Secure and seal the connection using an appropriate HVAC installation method.