The RGF120LF2A0AAA is a 10 Ton ACiQ packaged unit: condenser, coil and blower in one self-contained cabinet that installs on a roof curb or a ground pad with a single duct connection, no separate indoor unit. Rated SEER2 on R454B refrigerant.
The ACiQ RGF120LF2A0AAA is a 10-ton commercial gas packaged unit designed to provide reliable year-round heating and cooling for light commercial applications. Combining up to 180,000 BTU of gas heating capacity with 118,000 BTU of cooling capacity, this all-in-one rooftop system helps deliver reliable comfort while simplifying installation and preserving valuable indoor space.
The integrated gas furnace provides up to 180,000 BTU of heating capacity with 80% AFUE and two-stage burner operation to support dependable commercial heating performance. The naturally draining heat exchanger is designed to eliminate the need for periodic manual draining associated with positive-pressure heat exchangers, helping reduce service labor and maintenance requirements.
The cooling system provides 118,000 BTU of cooling capacity with an 11.0 EER and 15.0 IEER rating. The two-stage condenser and reliable fixed-speed scroll compressor are designed to provide dependable cooling performance for commercial applications.
With a 15.0 IEER and 11.0 EER rating, this system is designed to provide efficient commercial cooling performance. The direct-drive X-Vane indoor fan uses a vane axial fan with an electrically commutated motor, eliminating fan belts, blower bearings, and shafts while reducing the number of moving parts compared with traditional belt-drive systems.
The packaged rooftop configuration combines the gas furnace, cooling system, indoor fan, and associated controls into a single outdoor unit, helping simplify equipment placement and preserve valuable indoor space. The RGF series is field-convertible to horizontal airflow, providing installation flexibility when job-site conditions require an alternate airflow configuration. The unit also provides single-point gas and electrical connections.
The unit control board centralizes low-voltage connections and troubleshooting points, while an intuitive switch and rotary-dial arrangement simplifies indoor fan setup. The direct-drive ECM fan system provides variable fan-speed adjustment to support appropriate airflow configuration for the installation.
The ACiQ RGF120LF2A0AAA is designed for light commercial applications requiring a high-capacity gas/electric packaged system. Its 10-ton cooling capacity, up to 180,000 BTU heating capacity, high-static airflow capability, and field-convertible horizontal airflow make it well suited for commercial rooftop installations where dependable year-round heating and cooling are required.
The RGF120LF2A0AAA is designed for simplified service with easy-access handles for normally serviced components, a large control box for convenient access to controls and accessory installation, and a beltless direct-drive fan system that eliminates routine belt, pulley, blower-bearing, and shaft maintenance. Standard features include high- and low-pressure switches, a filter drier, and 2-inch filters. A sloped corrosion-resistant composite drain pan helps shed water and resist rust.
The ACiQ RGF120LF2A0AAA includes a 10-year warranty on the aluminized heat exchanger, a 5-year warranty on the compressor, and a 1-year warranty on replacement parts. Warranty coverage requires installation in accordance with applicable state and local codes and proper maintenance, including at least annual service.
Experience dependable year-round commercial comfort with the ACiQ RGF120LF2A0AAA. Combining two-stage gas heating up to 180,000 BTU with two-stage cooling, direct-drive X-Vane fan technology, and a packaged rooftop design, this 10-ton system provides high-capacity heating and cooling in a service-friendly outdoor unit.
Model: RGF120LF2A0AAA
