The RGF060LF2A0AAA is a 5 Ton ACiQ packaged unit: condenser, coil and blower in one self-contained cabinet that installs on a roof curb or a ground pad with a single duct connection, no separate indoor unit. Rated 13.4 SEER2 on R454B refrigerant.
The ACiQ RGF060LF2A0AAA is a 5-ton gas/electric packaged rooftop unit designed for light commercial heating and cooling applications. The RGF Standard Efficiency Gas Heat Light Commercial Rooftop Unit combines high-heat gas heating with single-stage electric cooling, direct-drive ECM/Vane Axial X-Vane™ fan technology, and a packaged rooftop configuration in one outdoor system.
The integrated gas heating system provides up to 150,000 BTU of heating input with 80% thermal efficiency. The high-heat configuration provides increased gas-heating capacity for commercial applications requiring substantial heating output from a packaged rooftop system.
The RGF060LF2A0AAA provides 5-ton nominal cooling capacity with 58,500 BTU of cooling capacity. The cooling system uses a single-stage scroll compressor and is rated at 13.4 SEER2 and 11.0 EER. The unit uses R-454B refrigerant with a fixed refrigerant metering device.
The RGF060LF2A0AAA provides 13.4 SEER2 and 11.0 EER cooling performance. Its direct-drive X-Vane™ indoor fan uses a Vane Axial design and electronically commutated motor. The beltless configuration eliminates conventional fan belts, blower bearings, and shafts while providing direct-drive airflow.
The packaged configuration integrates gas heating, electric cooling, indoor air movement, refrigeration components, and controls into one outdoor cabinet. The RGF060LF2A0AAA uses 460V, three-phase, 60 Hz electrical service. The unit is field-convertible to horizontal airflow and is designed for compatibility with existing rooftop curb installations dating back to 1989.
The RGF platform uses an upgraded unit control board with most low-voltage connections and troubleshooting points located in one convenient area. An intuitive switch and rotary-dial arrangement simplifies indoor fan setup. The unit includes high- and low-pressure switches, a filter drier, and 2-inch filters as standard equipment. An optional factory-installed Hot Gas Re-Heat dehumidification system is available for improved part-load humidity performance.
The ACiQ RGF060LF2A0AAA is designed for light commercial rooftop applications requiring integrated high-heat gas heating and electric cooling. Its 5-ton cooling capacity, 150,000 BTU heating input, 460V three-phase electrical configuration, R-454B refrigerant, medium-static fan configuration, and direct-drive X-Vane™ technology make it suitable for commercial spaces requiring a packaged rooftop heating and cooling solution.
The direct-drive X-Vane™ fan eliminates conventional belt and pulley components associated with belt-driven fan systems, reducing routine fan maintenance. Easy-access handles provide access to normally serviced components, while the no-strip screw system helps secure access panels and prevent screw stripping. The sloped, corrosion-resistant composite drain pan sheds water and resists rust. The naturally draining heat exchanger does not require periodic manual draining.
The ACiQ RGF060LF2A0AAA is covered by applicable manufacturer limited warranty provisions for the RGF packaged rooftop product family. Applicable coverage includes a 10-year limited warranty on the aluminized heat exchanger, a 5-year limited warranty on the compressor, and a 1-year limited warranty on replacement parts, subject to applicable warranty terms, installation requirements, maintenance requirements, registration provisions, and exclusions.
Experience reliable year-round commercial comfort with the ACiQ RGF060LF2A0AAA. Combining high-heat gas heating and 5-ton single-stage electric cooling with R-454B refrigerant and direct-drive X-Vane™ fan technology in one field-convertible packaged rooftop system.
Model: RGF060LF2A0AAA
