10" x 8" x 6" 26-Gauge Galvanized Steel HVAC T-Wye Duct Fitting

This 10" x 8" x 6" HVAC T-Wye duct fitting is designed to reduce a round duct run while adding a smaller branch connection. The fitting has a nominal 10" inlet, an 8" straight-through outlet, and a 6" angled branch.

Fabricated from 26-gauge galvanized steel, this T-Wye is suitable for residential and commercial HVAC air-distribution systems requiring an 8" outlet and a 6" branch from a 10" round duct run.

Sizing Note: T-Wye dimensions are listed in inlet, outlet, and branch order. This fitting has a 10" inlet, 8" outlet, and 6" branch.

Application: Designed to reduce a 10-inch round HVAC duct run to an 8-inch straight outlet while adding a 6-inch angled branch.

Sizing: Dimensions are listed in inlet, outlet, and branch order. This fitting has a 10" inlet, 8" outlet, and 6" branch.

Installation: Confirm all three required duct diameters before ordering. Secure each connection using project-appropriate fasteners, then seal the joints to help reduce air leakage.